[OVERVIEW-STANDARD]
Eight skis. Four snowboards. No roof required. Load from the back, not the top.
The Chuck Bucket was built for families and crews who are done cramming gear into the back of the car or wrestling roof boxes in ski boots. Hitch-mounted, rear-access, and featherlight at 25 lbs — it loads fast and disappears into the garage when the season's over.
-
Hauls up to 8 skis or 4 snowboards — fits the whole family in one load
-
No roof loading required — load from waist height, in ski boots, in the parking lot
-
100 lb weight capacity — handles full quivers without breaking a sweat
-
2-stage tilt system — get to your trunk even when fully loaded
-
Reinforced aluminum frame — corner posts double as gear docks
-
Anti-wobble mount — rock-solid at highway speeds with included tool
-
Rubber + neoprene guards — protects gear and vehicle
-
Modular with Chuck Rack — same base post, swap attachments in seconds
-
Powder-coated aluminum — winter-ready and rust-resistant
[/OVERVIEW-STANDARD]
[OVERVIEW-XL]
Ten skis. Five snowboards. Same rear-access ease — just built wider for the bigger crew.
The Chuck Bucket XL is everything the standard Bucket is, with a wider opening that fits more gear per load. Same hitch mount, same base post, same one-person operation — just more room when you need it.
-
Hauls up to 10 skis or 5 snowboards — wider opening fits more per trip
-
No roof loading required — load from waist height, in ski boots, in the parking lot
-
100 lb weight capacity — handles full quivers without breaking a sweat
-
2-stage tilt system — get to your trunk even when fully loaded
-
Reinforced aluminum frame — corner posts double as gear docks
-
Anti-wobble mount — rock-solid at highway speeds with included tool
-
Rubber + neoprene guards — protects gear and vehicle
-
Modular with Chuck Rack — same base post, swap attachments in seconds
-
Powder-coated aluminum — winter-ready and rust-resistant
[/OVERVIEW-XL]
[INCLUDED-STANDARD]
- Chuck Bucket attachment
- Full-Tilt BASE Post (fits standard 2" hitch)
- 48" Cam Strap (XXL Chuck Strap)
- Mounting pin + safety clip
- Neoprene top ring guard
- Pre-installed rubber edge guards
- Foam pad bottom — protects boards from aluminum floor contact
- Setup instructions + tools
[/INCLUDED-STANDARD]
[INCLUDED-XL]
- Chuck Bucket XL attachment
- Full-Tilt BASE Post (fits standard 2" hitch)
- 48" Cam Strap (XXL Chuck Strap)
- Mounting pin + safety clip
- Neoprene top ring guard
- Pre-installed rubber edge guards
- Foam pad bottom — protects boards from aluminum floor contact
- Setup instructions + tools
[/INCLUDED-XL]
[SPECS-STANDARD]
| Ski Capacity |
8 skis / 4 snowboards |
| Opening Dimensions |
18" W × 12" L |
| Height |
18" H |
| Material |
Powder-coated aluminum |
| Weight |
~25 lbs |
| Max Load |
100 lbs |
| Tilt |
2-stage, up to 90° |
| Hitch Size |
Standard 2" receiver (1.25" adapter sold separately) |
| Install Time |
~1–2 minutes with included tool |
| Storage |
Folds flat |
[/SPECS-STANDARD]
[SPECS-XL]
| Ski Capacity |
10 skis / 5 snowboards |
| Opening Dimensions |
24" W × 12" L |
| Height |
18" H |
| Material |
Powder-coated aluminum |
| Weight |
~28 lbs |
| Max Load |
100 lbs |
| Tilt |
2-stage, up to 90° |
| Hitch Size |
Standard 2" receiver (1.25" adapter sold separately) |
| Install Time |
~1–2 minutes with included tool |
| Storage |
Folds flat |
[/SPECS-XL]
[FIT]
-
Fits standard 2" hitch receivers — 1.25" adapter sold separately
-
Works with all ski and snowboard sizes — no adapters needed
-
Accommodates poles, helmets, and long gear — open top design fits more than just skis
-
Modular with Chuck Rack — same BASE Post, swap attachments in seconds
Note on vehicle clearance: The Chuck Bucket sits behind your vehicle on the hitch. If your vehicle has a recessed hitch or a low rear bumper, email us a photo and we'll confirm clearance before you order.
[/FIT]
